PACERBOT Part 13-15: Stadium Runs

Some footage of the robot running in the stadium. The process of tweaking the PID values is tricky. Even after a long time working on these values, I have given up (for the day!) and stayed with slow speeds, which are easier to work with.

At the beginning, the main challenge I faced was to get the sensors to distinguish between the line from the red background. Calibrating them is done using another Arduino sketch, one by one.The RGB values differ slightly from one sensor to another, and determining the threshold is a trial and error process. After overcoming this hurdle, I started to work on the interesting (and yet tedious) part – tuning the control algorithm.

This process is mostly done using trial and error as well. I have decided on a general value for the Proportional part of the PID, using a simple linear equation. Because I have decided the steering servo’s maximum value should be 93 degrees at position 6 (line is the most left), and minimum value 75 degrees at position 0 (line on the right) and 84 degrees is moving straight, I have got the function:

angle = 3*position + 75

That way, the coefficient of the position, is the Proportional part’s base value. I have proceeded and further tweaked it throughout the day.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s